https://www.youtube.com/watch?v=dtlW3ky ... e=youtu.be
Read the comments too. He also left a long list of all types of suppliers too.
Camera's used and Links to view/buy:

Sites I get my awesome FPV goodies from:
========Mini Talon Setup========
Build Log here: http://tiny.cc/AdamGMTBuildLog
In the air:
-Mini Talon Kit ► http://tiny.cc/MiniTalon
-ZOHD 4S2P 7,000 Lion Pack ► http://tiny.cc/ZOHD-7000-Lion
-SunnySky Motor ► http://tiny.cc/SunnySky2216
-8x6ep APC prop ► http://tiny.cc/8x6ep
-Metal gear servos x 4 ► http://tiny.cc/MG91
-60a ESC ► http://tiny.cc/Skywalker60aESC
-DJI HD Camera ► http://tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD ► UK Link: http://tiny.cc/SanDiskV30UK - USA Link: http://tiny.cc/SanDiskV30USA
-360 Degree Pan Servo ► http://tiny.cc/owev0y
-1.2g Vtx ► http://tiny.cc/kwcv0y
-1.2 Antenna ► http://tiny.cc/VASBluebeam1G2
-Dragonlink Micro Rx ► http://tiny.cc/DragonLinkRx
-MFD Autopilot with Airspeed sensor ► http://tiny.cc/8ucv0y
-Servo horns ► http://tiny.cc/ServoHorns
-Adjustable Pushrod Linkage ► http://tiny.cc/PushrodLinkage
-Turnigy 5v UBEC ► USA link: http://amzn.to/2z7HOKM UK link: http://amzn.to/2ib6hfa
-Quanum 12v UBEC ► USA link: http://amzn.to/2xHBbTq - UK link: http://amzn.to/2ylYBKM
On me:
-Skyzone OLED FPV Goggles ► http://tiny.cc/Skyzone03O
-Taranis Transmitter ► http://tiny.cc/DragonLinkV3tx
-Dragon Link V3 tx ► http://tiny.cc/6xcv0y
-SRH771 diamond antenna ► USA link: http://amzn.to/2gG50ZU -
UK link: http://amzn.to/2yiHpZo
On my Groundstation:
-K&F Concept Tripod ► https://amzn.to/2KYlh9j
-1.2 ghz VAS Pepperbox antenna ► http://tiny.cc/6adv0y
-Singularity CP Antenna 1.2g ► http://tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx ► http://tiny.cc/hbdv0y
-Diversity Demon ► http://tiny.cc/ubdv0y
-DVR ► http://tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► http://tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► http://tiny.cc/cedv0y
-Digital Volt Meter ► http://tiny.cc/gfdv0y
-Eachine Diversity Monitor with DVR ► http://tiny.cc/ehfv0y
3D Printed Parts:
3D Printer ► http://tiny.cc/qql96y
Filament ► http://tiny.cc/EryonePLA
Canopy for GWS 360 servo ► http://tiny.cc/GwsCanopy
Front Skid ► http://tiny.cc/MTFrontSkid
Rear Skid ► http://tiny.cc/MTRearSkid
Pitot mount ► http://tiny.cc/Pitot
Central cage/AP holder ► No longer on Thingiverse. I can send file if requested.
Dragonlink Dipole holder ► http://tiny.cc/DLholder
360 Mount and Camera holder ► http://tiny.cc/360MountCameraHolder
Tools etc:
Flat Carbon Strips for reinforcing lid ► http://tiny.cc/CarbonStrips
E6000 Glue ► http://tiny.cc/E6000Glue
Laminate ► http://tiny.cc/laminate
Laminating Iron ► http://tiny.cc/LaminatingIron
Foam Cutting Tool ► http://tiny.cc/vxgv0y