A comparison of 4 cameras - Side by side- Plus links 9/2020

FPV (First Person View) Projects
(always fly within AMA guidelines)
Post Reply
User avatar
Neons
Site Admin
Posts: 675
Joined: Tue Nov 22, 2011 10:28 pm
Location: youtube ne0ns1
Contact:

A comparison of 4 cameras - Side by side- Plus links 9/2020

Post by Neons »

I was impressed with the simply way this person did a comparison of these 4 cameras in under 5 minutes. I leaned toward the Ratel overall conditions..
https://www.youtube.com/watch?v=dtlW3ky ... e=youtu.be

Read the comments too. He also left a long list of all types of suppliers too.

Camera's used and Links to view/buy:
📷 Foxeer Predator V5 (Mini/1.8mm) ► http://tiny.cc/PredatorV5
📷 Foxeer Toothless 2 (Micro/1.7mm) ► http://tiny.cc/Toothless2
📷 Runcam Phoenix 2 (2.1mm) ► http://tiny.cc/Phoenix2
📷 Caddx Ratel (Starlight/2.1mm) ► http://tiny.cc/CaddxRatel

☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :)http://tiny.cc/BuyAdamGaCoffee

🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to YouTube: https://www.facebook.com/AdamGdoesFPV

Sites I get my awesome FPV goodies from:
✅ Banggood ► http://tiny.cc/BanggoodFPV
✅ RMRC ► http://tiny.cc/RMRC
✅ HobbyKing ► http://tiny.cc/HobbyKing
✅ Gearbest ► http://tiny.cc/GearBestFPV

========Mini Talon Setup========
Build Log here: http://tiny.cc/AdamGMTBuildLog

In the air:
-Mini Talon Kit ► http://tiny.cc/MiniTalon
-ZOHD 4S2P 7,000 Lion Pack ► http://tiny.cc/ZOHD-7000-Lion
-SunnySky Motor ► http://tiny.cc/SunnySky2216
-8x6ep APC prop ► http://tiny.cc/8x6ep
-Metal gear servos x 4 ► http://tiny.cc/MG91
-60a ESC ► http://tiny.cc/Skywalker60aESC
📷 Foxeer Predator V5 (Mini/1.8mm) ► http://tiny.cc/PredatorV5
📷 Foxeer Toothless 2 (Micro/1.7mm) ► http://tiny.cc/Toothless2
📷 Runcam Phoenix 2 (2.1mm) ► http://tiny.cc/Phoenix2
📷 Caddx Ratel (Starlight/2.1mm) ► http://tiny.cc/CaddxRatel
-DJI HD Camera ► http://tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD ► UK Link: http://tiny.cc/SanDiskV30UK - USA Link: http://tiny.cc/SanDiskV30USA
-360 Degree Pan Servo ► http://tiny.cc/owev0y
-1.2g Vtx ► http://tiny.cc/kwcv0y
-1.2 Antenna ► http://tiny.cc/VASBluebeam1G2
-Dragonlink Micro Rx ► http://tiny.cc/DragonLinkRx
-MFD Autopilot with Airspeed sensor ► http://tiny.cc/8ucv0y
-Servo horns ► http://tiny.cc/ServoHorns
-Adjustable Pushrod Linkage ► http://tiny.cc/PushrodLinkage
-Turnigy 5v UBEC ► USA link: http://amzn.to/2z7HOKM UK link: http://amzn.to/2ib6hfa
-Quanum 12v UBEC ► USA link: http://amzn.to/2xHBbTq - UK link: http://amzn.to/2ylYBKM

On me:
-Skyzone OLED FPV Goggles ► http://tiny.cc/Skyzone03O
-Taranis Transmitter ► http://tiny.cc/DragonLinkV3tx
-Dragon Link V3 tx ► http://tiny.cc/6xcv0y
-SRH771 diamond antenna ► USA link: http://amzn.to/2gG50ZU -
UK link: http://amzn.to/2yiHpZo

On my Groundstation:
-K&F Concept Tripod ► https://amzn.to/2KYlh9j
-1.2 ghz VAS Pepperbox antenna ► http://tiny.cc/6adv0y
-Singularity CP Antenna 1.2g ► http://tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx ► http://tiny.cc/hbdv0y
-Diversity Demon ► http://tiny.cc/ubdv0y
-DVR ► http://tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► http://tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► http://tiny.cc/cedv0y
-Digital Volt Meter ► http://tiny.cc/gfdv0y
-Eachine Diversity Monitor with DVR ► http://tiny.cc/ehfv0y

3D Printed Parts:
3D Printer ► http://tiny.cc/qql96y
Filament ► http://tiny.cc/EryonePLA
Canopy for GWS 360 servo ► http://tiny.cc/GwsCanopy
Front Skid ► http://tiny.cc/MTFrontSkid
Rear Skid ► http://tiny.cc/MTRearSkid
Pitot mount ► http://tiny.cc/Pitot
Central cage/AP holder ► No longer on Thingiverse. I can send file if requested.
Dragonlink Dipole holder ► http://tiny.cc/DLholder
360 Mount and Camera holder ► http://tiny.cc/360MountCameraHolder

Tools etc:
Flat Carbon Strips for reinforcing lid ► http://tiny.cc/CarbonStrips
E6000 Glue ► http://tiny.cc/E6000Glue
Laminate ► http://tiny.cc/laminate
Laminating Iron ► http://tiny.cc/LaminatingIron
Foam Cutting Tool ► http://tiny.cc/vxgv0y
Bob Pacheco
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest