Page 2 of 2

Re: 1/4 Scale Balsa USA Piper Cub - Set Decals in Place

Posted: Sat Dec 15, 2018 11:18 pm
by Neons
Dec.10, 2018

Here it is almost ready to fly. All the decal registration numbers on top and bottom of the wing in place. The rudder has the Cub decal and reg. numbers in place also. Now it is starting to look like it should. World Models supplied the decal sheets. They are $10 per sheet.

Re: 1/4 Scale Balsa USA Piper Cub - Finished and Ready to Fly

Posted: Sat Dec 15, 2018 11:24 pm
by Neons
Dec.14,2018

Well this plane is almost ready. I just need a few bolts from Home Depot and tighten up the propeller nut. Now that you see the photos of it outdoors with me holding it up you see how large it is. About 108 inch wing and 70 inch fuselage. I still have to weigh the total weight and I want to do a video with the plane tied to a pole or tree and full throttle. I will post it here along with a YouTube video on maiden flight when it happens.

Re: 1/4 Scale Balsa USA Piper Cub - Big Electric Motor Install Draw Style Unit

Posted: Thu Oct 10, 2019 10:05 pm
by Neons