Bristol County Radio Control Club Forum

I am constructing this plane for little or no wind and indoors flying. It is a laser kit. LED lights with multi colors will be instaled. Transparent blue cover on top and both sides of the tail feathers. Clear on sides and underneath to allow the colors to be seen in true color. More pics to come at the finish and with maybe a video inflight with lights.
http://s1190.photobucket.com/albums/z45 ... an%202012/

Or you can visit Vimeo. I have 24 videos here also.
http://vimeo.com/34827199

**Neons** Bob Pacheco

Looks good Bob, look foward to future pics.

I got the lights in place. It was a pain mixing different Led voltages. I made a slight ajustment with a small resistor. I did not put a lot of lights due to the size of the plane and battery space. . This is just a trial aircraft. Now for the electronics and the covering. There is a small video demo of lights in Photobucket with a few Led pictures.
http://s1190.photobucket.com/albums/z45 ... lights.mp4

http://i1190.photobucket.com/albums/z45 ... eyLEDs.jpg

http://i1190.photobucket.com/albums/z45 ... eyLEDs.jpg

**Neons** Bob

Nice Bob!
Curious, what are you using to drive the LEDs? Are they controllable from your transmitter?

I used a battery just connected directly. I used a 3.6v lion battery. I have to put in a smaller 3.7vLipo battery due to space limitations. The plane should be under a 8 ounce maximum weight to fly good. There just is no room in a slim plane 16" long for transmitter extras.
Bob

Just adding finish pics.